Архив за категорията » прозорци «

Петък, 11 септември, 2009 | Автор:

Мир в земята на USB

Под *нищо операционна система, като няколко дяла на USB диск не е ракетна наука, просто работи. В моя случай, ми USB диск има две прегради, защото първия дял е стартираща Arch Linux инсталатор.

аз имам Windows на настолен у дома – най-вече за игри – и много от колегите ми да го използвам. Тъй като Windows не върши много добре с не-Windows дялове Аз помислих, че може да създаде FAT32 дял на флаш паметта, след като стартиращ Arch Linux дял. FAT32 е почти повсеместен и е използваем на всеки общ десктоп операционна система в света.

bleh

За съжаление тя не работи право на разстояние бухалката. очевидно, Microsoft в своята безкрайна мъдрост реши, че флашки се очаква да има един (и само един) дял. В действителност Windows открива първия дял и след това игнорира всички други, които се случват, за да се създаде:

Please Format

заблуждавам, не, Аз не искам да форматирам инсталация дял Arch Linux

Трика за постигане на това е работа, за да заблуди Windows да си мислят, че устройството е не редовен стик USB памет, но може би в твърдо състояние, с твърд диск която се случва да бъде свързан чрез USB. да, знам, това е сериозно глупав, че Windows се държи по този начин. В твърдо състояние, твърд диск е просто огромен голям (и бързо) памет в края на краищата!

Намерих няколко източници за това как да направите това обаче аз все още трябваше да разбера някои неща на моята собствена. По-конкретно, водачите, които открих или пропуснати някои стъпки, или не са предоставили достатъчно информация за това къде да изтеглите пакета с драйвери.

This procedure involves manually changing hardware drivers and installingnon-signeddriversnot intended for your hardware”. I know someone is going to break their system and blame me so I say now that I take no responsibility for any damage you may do to your Windows system as a result of this. Read that again. 😛

Instructions

remove the highlighted text

click for larger version

Download and unzip the driver, originally created by Hitachi, тук. Open the cfadisk.inf file in notepad (or your favourite plaintext editor), and find the section labeled [cfadisk_device]. Remove the section highlighted on the right:

Minimize (don’t close) the editor and go to your desktop iconsright-click on My Computer and select Properties. Select the hardware tab and then select [Device Manager]:

System Properties

Find the device underDisk drives”, щракнете с десния бутон си памет и изберете Properties:

Device Manager

Щракнете върху раздела Детайли и в падащото меню на тази страница, изберете “Хардуер документи за самоличност”. Кликнете на първия ред в списъка на хардуер документи за самоличност и натиснете Ctrl + C, за да копирате името:

USB Hardware Ids

Не затваряйте този прозорец, се върна в бележника (която е сведена до минимум) и поставете хардуер ID в която бе отстранен предишното съдържание.

Changes pasted into notepad

Запазете файла в бележник и се върнете към диалоговия прозорец собственост на устройството. Щракнете върху “шофьор” раздел и натиснете [Най-pdate Driver…] бутон. В прозорците, които изскачат, изберете “Не, не това Tиме”; [Nвътр] -> “Инсталиране от списък или сСПЕЦИФИЧНИ място (Напреднал)”; [Nвътр] -> “Don't търсене. Аз ще избера драйвера за инсталиране.”; [Nвътр] -> [НАве Disk…].

Unsigned Drivers - Click Continue Anyway

Отидете в папката, където сте записали модифициран cfadisk.inf файл. Кликнете [Добре]. Ще намерите

there is a Hitachi Microdrive driver listed. Select this and click [Nвътр]. When the warning

appears, кликване [Yes]. Another warning will pop up regarding a similar issue (these are theunsigned” и “not intended for your hardwarewarnings I mentioned earlier). Кликнете [Continue Anyway]:

At this point I recommend closing all the dialog boxes related to the setup. Finally, remove and re-insert the memory stick into your USB port and you should find that the extra partitions on the stick are accessible. In the worst-case scenario, you might still need to partition the disk however the hard part is over. 🙂

Дял
Понеделник, April 06th, 2009 | Автор:

I came across 2 bugs on Windows Server 2003 that are also relevant to Windows XP.

Short Circuits

1. Internet Explorer‘s Desktop icon is disabled. When you double-click on the icon, expecting IE to launch, it simply produces an additional shortcut. Subsequent double-clicks again produce more shortcuts. It is possible, as a workaround, to launch IE from the Start Menu.

My first guess was that malware was attempting to make me click on these new shortcuts where the new shortcuts opened further malware. This idea quickly faded though since, if malware were to have the system privileges to produce these symptoms, it wouldn’t need me to provide further privileges.

I eventually found тук what the actual problem was. В моя случай, the cause was related to IE6 being outdated. If a Windows registry entry is namedLegacyDisableand is added to specific types of registry keys, it lets Windows know that the key is obsolete and that it has only been left behind for backwards-compatibility. In this case, it disabled the intended primaryverbfunction (the double-click) of the shortcut: launching IE.

To fix, you can either update to the latest version of IE or fix the registry entry directly. If you experience this issue even with the latest version of IE then the registry value is the only way I know how to fix it.

Danger, Will Robinson!

Though this is a trivial registry change, the registry is still a dangerous thing to mess with so, as usual, back up your registry: See KB322756. Nobody gets to blame me for trashing their system. 😛

De-Register me!

Paste the following into a .reg file and execute it; or manually remove theLegacyDisableentries referred-to here:

[HKEY_CLASSES_ROOT\CLSID\{871C5380-42A0-1069-A2EA-08002B30309D}\shell\NoAddons\]
"LegacyDisable"=-
 
[HKEY_CLASSES_ROOT\CLSID\{871C5380-42A0-1069-A2EA-08002B30309D}\shell\OpenHomePage]
"LegacyDisable"=-

Fire me up!

2. When trying to browse to any site from within IE, IE remains dormant while Firefox is launched. Firefox then loads the page which was originally requested in IE.

While many might most of the time consider this to be a triumph [insert childish laughter here], the site I wanted to browse to was the Windows Updates site which, unfortunately, does not work when using Firefox. The same would apply to other sites which depend on the web browser supporting ActiveX.

De-Register Me Too!

I eventually found the solution тук, and it turns out to be similar to the solution for the first bugexcept that it is to remove an entire key. Отново, ensure you have a backup of your registry before continuing. Here is the relevant content of the .reg file:

[-HKEY_CLASSES_ROOT\CLSID\{C90250F3-4D7D-4991-9B69-A5C5BC1C2AE6}]

I hope that resolves things for anyone else having similar issues. 🙂

Дял
Сряда, March 18th, 2009 | Автор:

[edit] So much for that. It turns out that openssl is able to determine that the key and certificate are already in a single file. Therefore, не csplitting required (добре, I hope somebody reading this at least learned about how nice csplit is). In fact, the whole script might as well be obsoleteblaargh. Well, at least it gives a nice warning about not giving a blank passphrase. 😀

Here’s the new version:

pem2pfxconverts a .pem-formatted file containing a private key and signed certificate into a Windows-compatible .pfx certificate file.

#!/bin/bash
#pem2pfx
#v0.2
#Труден - brendan@сwiftspirit.co.za
# Converts a .pem certificate file to .pfx format
# $1 is the source file
set -e
 
ако [ $# = 1 ]; тогава
  outputfile=`echo $1 | sed 's/.pem$/.pfx/'`
 
  echo "Please specify a password below. Windows refuses to import a .pfx certificate with a blank password."
  openssl pkcs12 -export -out $outputfile  $1
 
 else
  echo "pem2pfx - converts a .pem formatted private-key and certificate file to an IIS-compatible .pfx file."
  echo "Usage: pem2pfx inputfile.pem"
fi

още…

Дял
Събота, 21 февруари, 2009 | Автор:

The relatively new document types Офис 2007 has given some web hosts problems when their clients want to offer documents for download. Most often, the documents are being offered by the web server as text/html which is then rendered as a ton of garbage on the web user’s screen.

The best way to resolve this is to add all the MIME types to the server’s main configuration. IIS7 for Windows already has these MIME types set up correctly by default. IIS6 and IIS5 require the MIME types to be added, as might Apache on older installations. For Apache, there is also a workaround for the individual domain owner to add the mime types via Apache’s .Htaccess досие.

IIS 6 MIME type addition (for the Server Administrator)

Before this can be done, ensure that your server is also set to allow direct metabase editing:

  1. Load IIS Manager: Започнете -> RООН, “inetmgr” -> [Добре]
  2. Right click the “сървър” and click “Properties
  3. Within theInternet Information Servicestab (usually the only tab), ensure that theEnable Direct Metabase Editcheckbox is checked.
  4. Кликнете [Добре]

Be sure to back up IIS’s configuration (тук for IIS5) beforehand. I won’t take any responsibility for an admin breaking his server. I have reason to believe this may also work on IIS5 however I have just as much reason to believe that it might just give lots of errors. If an IIS5 / Windows 2000 admin is willing to test this for me after backing up your configuration please let me know of the results.

Copy the following text into a file named msoff07-addmime.vbs and execute it once from the commandline by typing cscript msoff07-addmime.vbs and pressing Enter. If you run it more than once, the MIME types will be added each time and you will have multiple identical entries:

' This script adds the necessary Office 2007 MIME types to an IIS 6 Сървър.
' To use this script, just double-click or execute it from a command line.
' Running this script multiple times results in multiple entries in the
' IIS MimeMap so you should not run it more than once.
' Modified from http://msdn.microsoft.com/en-us/library/ms752346.aspx
 
Dim MimeMapObj, MimeMapArray, MimeTypesToAddArray, WshShell, oExec
Const ADS_PROPERTY_UPDATE = 2 
 
' Set the MIME types to be added
MimeTypesToAddArray = Array(".docm", "application/vnd.ms-word.document.macroEnabled.12", _
".docx", "application/vnd.openxmlformats-officedocument.wordprocessingml.document", _
".dotm", "application/vnd.ms-word.template.macroEnabled.12", _
".dotx", "application/vnd.openxmlformats-officedocument.wordprocessingml.template", _
".potm", "application/vnd.ms-powerpoint.template.macroEnabled.12", _
".potx", "application/vnd.openxmlformats-officedocument.presentationml.template", _
".ppam", "application/vnd.ms-powerpoint.addin.macroEnabled.12", _
".ppsm", "application/vnd.ms-powerpoint.slideshow.macroEnabled.12", _
".ppsx", "application/vnd.openxmlformats-officedocument.presentationml.slideshow", _
".pptm", "application/vnd.ms-powerpoint.presentation.macroEnabled.12", _
".pptx", "application/vnd.openxmlformats-officedocument.presentationml.presentation", _
".sldm", "application/vnd.ms-powerpoint.slide.macroEnabled.12", _
".sldx", "application/vnd.openxmlformats-officedocument.presentationml.slide", _
".xlam", "application/vnd.ms-excel.addin.macroEnabled.12", _
".xlsb", "application/vnd.ms-excel.sheet.binary.macroEnabled.12", _
".xlsm", "application/vnd.ms-excel.sheet.macroEnabled.12", _
".xlsx", "application/vnd.openxmlformats-officedocument.spreadsheetml.sheet", _
".xltm", "application/vnd.ms-excel.template.macroEnabled.12", _
".xltx", "application/vnd.openxmlformats-officedocument.spreadsheetml.template") 
 
' Get the mimemap object
Set MimeMapObj = GetObject("IIS://LocalHost/MimeMap")
 
' Call AddMimeType for every pair of extension/MIME type
For counter = 0 към UBound(MimeTypesToAddArray) Стъпка 2
    AddMimeType MimeTypesToAddArray(counter), MimeTypesToAddArray(counter+1)
Next
 
' Create a Shell object
Set WshShell = CreateObject("WScript.Shell")
 
' Stop and Start the IIS Service
Set oExec = WshShell.Exec("net stop w3svc")
Do While oExec.Status = 0
    WScript.Sleep 100
Loop
 
Set oExec = WshShell.Exec("net start w3svc")
Do While oExec.Status = 0
    WScript.Sleep 100
Loop
 
Set oExec = Nothing
 
' Report status to user
WScript.Echo "Microsoft Office 2007 Document MIME types have been registered."
 
' AddMimeType Sub
Sub AddMimeType (Ext, MType)
 
    ' Get the mappings from the MimeMap property.
    MimeMapArray = MimeMapObj.GetEx("MimeMap") 
 
    ' Add a new mapping.
    i = UBound(MimeMapArray) + 1
    Redim Preserve MimeMapArray(i)
    Set MimeMapArray(i) = CreateObject("MimeMap")
    MimeMapArray(i).Extension = Ext
    MimeMapArray(i).MimeType = MType
    MimeMapObj.PutEx ADS_PROPERTY_UPDATE, "MimeMap", MimeMapArray
    MimeMapObj.SetInfo
 
End Sub

Apache MIME type addition (for the Server Administrator)

Apache stores its MIME types in a file normally located at $installpath/conf/mime.types. See the mod_mime documentation for more on how it works. Arch Linux installs its MIME types at /etc/httpd/conf/mime.types и Parallels Plesk installs it in /usr/local/psa/admin/conf/mime.types. Your distribution might have it in another place, so find your mime.types file by running locate mime.types.

Add the following lines to your mime.types file:

application/vnd.ms-word.document.macroEnabled.12                          docm
application/vnd.openxmlformats-officedocument.wordprocessingml.document   docx
application/vnd.ms-word.template.macroEnabled.12                          dotm
application/vnd.openxmlformats-officedocument.wordprocessingml.template   dotx
application/vnd.ms-powerpoint.template.macroEnabled.12                    potm
application/vnd.openxmlformats-officedocument.presentationml.template     potx
application/vnd.ms-powerpoint.addin.macroEnabled.12                       ppam
application/vnd.ms-powerpoint.slideshow.macroEnabled.12                   ppsm
application/vnd.openxmlformats-officedocument.presentationml.slideshow    ppsx
application/vnd.ms-powerpoint.presentation.macroEnabled.12                pptm
application/vnd.openxmlformats-officedocument.presentationml.presentation pptx
application/vnd.ms-powerpoint.slide.macroEnabled.12                       sldm
application/vnd.openxmlformats-officedocument.presentationml.slide        sldx
application/vnd.ms-excel.addin.macroEnabled.12                            xlam
application/vnd.ms-excel.sheet.binary.macroEnabled.12                     xlsb
application/vnd.ms-excel.sheet.macroEnabled.12                            xlsm
application/vnd.openxmlformats-officedocument.spreadsheetml.sheet         xlsx
application/vnd.ms-excel.template.macroEnabled.12                         xltm
application/vnd.openxmlformats-officedocument.spreadsheetml.template      xltx

Apache MIME type addition (For the domain owner with at least FTP accessusing .htaccess file)

Add the following text to your domain’s .Htaccess досие, most commonly in an httpdocs/ directory

AddType application/vnd.ms-word.document.macroEnabled.12 docm
AddType application/vnd.openxmlformats-officedocument.wordprocessingml.document docx
AddType application/vnd.ms-word.template.macroEnabled.12 dotm
AddType application/vnd.openxmlformats-officedocument.wordprocessingml.template dotx
AddType application/vnd.ms-powerpoint.template.macroEnabled.12 potm
AddType application/vnd.openxmlformats-officedocument.presentationml.template potx
AddType application/vnd.ms-powerpoint.addin.macroEnabled.12 ppam
AddType application/vnd.ms-powerpoint.slideshow.macroEnabled.12 ppsm
AddType application/vnd.openxmlformats-officedocument.presentationml.slideshow ppsx
AddType application/vnd.ms-powerpoint.presentation.macroEnabled.12 pptm
AddType application/vnd.openxmlformats-officedocument.presentationml.presentation pptx
AddType application/vnd.ms-powerpoint.slide.macroEnabled.12 sldm
AddType application/vnd.openxmlformats-officedocument.presentationml.slide sldx
AddType application/vnd.ms-excel.addin.macroEnabled.12 xlam
AddType application/vnd.ms-excel.sheet.binary.macroEnabled.12 xlsb
AddType application/vnd.ms-excel.sheet.macroEnabled.12 xlsm
AddType application/vnd.openxmlformats-officedocument.spreadsheetml.sheet xlsx
AddType application/vnd.ms-excel.template.macroEnabled.12 xltm
AddType application/vnd.openxmlformats-officedocument.spreadsheetml.template xltx
Дял
Сряда, January 28th, 2009 | Автор:

I’m very happy to report that 2 much-needed and related features I’d filed bugs for at KDE’s Bug Tracking System bugzilla were added to KDE 4.2‘s KRDC. KDE 4.2 was just released and is now available within kdemod (aka Chakra)’s repositories. KDE-loving *nix-loving Windows administrators rejoice!

  • Ability to specify a default Username: Previously, before logging in, you’d be prompted for the username. Now the prompt is automatically filled in with a default username.
  • Ability to recognise LDAP logins and remember the password using kwallet as an LDAP Login.
KRDC options added

New KRDC options added

A very big thank you to the developer maintaining KRDC, Urs Wolfer.

Дял