Tag-Arhiv za » Pacman «

Thursday, November 12th, 2009 | Autor:

If you ever find yourself updating a single application in Arch Linux (a very bad idea, btw) and it upgrades readline you might end up seeing an error along the lines of:
/bin/bash: error while loading shared libraries: libreadline.so.5: cannot open shared object file: No such file or directory
Hopefully you still have a bash prompt open and you haven’t closed them all. If you still can, immediately run the following:
pacman -S bash
else you won’t be able to run bash any more because bash would still be linking to the old version of readline.

Također, in future, don’t run
pacman -Sy application
(python in my case)
instead, run:
pacman -Syu
which will ensure that all applications are upgraded.

Personally, I think that bash should have had a dependency set saying that it required the old specific version of readline and the same for the new bash, requiring the new version of readline. Regardless, rather play it safe. 😉

Srijeda, 22. travnja, 2009 | Autor:

Svod Linux je postupak instalacije je dokumentirano na Arch Wiki. Preporučujem da osobe novi u Arch pokušajte izvrsna Vodič za početnike umjesto Službeni Arch Linux Install Guide. Iako su obje wiki unosi pokriti sličnu zemlju, početnike Vodič daje puno više relevantnih informacija za one koji su novi u sustav. Početnike Vodič je usmjeren na desktop instalacije i, kao što sam instalirate poslužitelj, Neću se ide kroz instalaciju grafičkom okruženju uopće. Pod pretpostavkom da ste nakon moje instalacije, Pretpostavljam da sam slijedio Vodič za početnike pa sve do i uključujući instalaciju sudo. Ja instalirao ssh demon poslije nego tijekom početnog postavljanja međutim.

Nekoliko malih preporuke i napomene u vezi instalacije:

  • Ako možete,, razmotriti korištenje USB memory stick za instalatera i držati ga pri ruci za buduće instalacije.
  • Držim kopiju moje lokalne “repozitorij” instaliranih aplikacija na mom instalater memory stick. Nakon instalacije će se spremiti malo preuzimanje i ažuriranje vremena kopiranjem na novi server je / var / cache memorije / Pacman / PKG / mape. Spremište na moj desktop je obično 1.7 GB
  • Za rc.conf, Južnoafrički-odgovarajuće regionalne postavke:
    LOKALNI =”en_ZA.utf8″
    TIMEZONE =”Afrika / Johannesburg”
  • Ja sam postavio mrežu vrlo jednostavno, prema vodiču, te će se proširiti na mreži postava u kasnijoj poštom.
  • Kao što je za poslužitelj, moja ne-privilegirani korisnik na poslužitelju je samo dio 3 skupine: kotača (za sudo), skladištenje, i korisnici. Desktop korisnik će vjerojatno biti na mnogo više skupina.

Ja radije koristite aplikaciju pod nazivom jogurt umjesto Arch je zadano Voditelj paket. Yaourt ima isti korištenja sintaksu kao Pacman osim što podržava nekoliko dodatnih mogućnosti. To je zapravo omot zahtjev u tom njemu, pak, koristi Pacman. Važnije, yaourt podržava instalaciju aplikacija iz Arch-a ZLATO. The ZLATO je repozitorij instalacijskih skripti izgradili Arch korisnike za Arch korisnicima da lako instalirati aplikacije koje nisu službeno podržan od strane glavnih Arch spremištima. Yaourt možete preuzeti i instalirati aplikacije iz AUR ili glavnom repozitorija sa istim zapovjedništvom, liječenje Aur kao “samo još jedan repozitorij”. Pacman nažalost ne podržava taj.

Opet, Instalacija je prekrivena Wiki. Preporučujem jednostavan put spominje u wiki, ako ste novi na Arch. Njegova previše prerano to učiniti na teži način (Također je spomenuo u unosu wiki).

Kad je učinio, nadogradnju sustava izdavanjem jednu naredbu:

yaourt -Syu


Pacman -Syu

i slijedite dane preporuke.

Thursday, January 01st, 2009 | Autor:

Očigledno, what operating system you use can say a lot about you. If you’re using some form of *nix, which distro you’re using can say a lot as well. Redundancy aside, I believe that a Linux distribution depends absolutely on its package management and distribution system.

I liked apt-get (1, 2) but there was some technical problem at some point and it caused me to use aptitude instead. Using aptitude is slightly easierit has more features automated into single, logical, commands where apt-get requires separate commands. Aptitude also has a curses-based GUI. If you’re not using the GUI then, other than brevity in terms of number of commands to learn, there is apparently no technical reason to prefer one over the other. Aptitude and apt-get serve K/X/Ubuntu i Debian dobro. From this point, I use the names Kubuntu and Ubuntu in a loosely interchangeable fashion.

In my use of CentOS (based on Red Hat), I’ve found I like yum. It seems to work in much the same as aptitudeone command to rule them all. It has some rather annoying default behaviour I’m not going to get into here as its most likely because I’m just not used to it. At least from a technical perspective, it is very good. I believe that Fedora also makes use of yum though my experience with Fedora is very limited.

the theory

Fedora and Ubuntu are in a class of distributions that have a fairly rigorous release cycle. Ubuntu 8.10 (the version is named so for the year and month of its release) will not, except for major bugs and minor changes, have another major update until the next version, Jaunty Jackalope. Ubuntu users have the latest versions of most software on their desktops right now. In the months preceding the next release, however, they’re not going to be so lucky unless they like using “beta” releases. As I’m not very familiar with Fedora, I’m not going to bother going into its release cycle.

These 2 distributions are also within a class of distributions known asbinary” ili “binary-baseddistributions. This means that when you download an update, the files that are downloaded are precompiled and should run on anysupportedhardware. This isn’t specifically optimised for your desktop’s hardware, na primjer, your processor. Perhaps you have an AMD processor which has extra instruction support which Intel CPUs do not have. The reverse could also be true. For this reason, a binary-release distribution cannot optimise for one particular brand of hardware. Regardless of thisnon-optimisation”, it should run at a decent pace.

the practice!

Oko 2 years ago I started using Kubuntu. After a few months of working with it, I started to learn more about its specifics. I’m not much of a fan of using GUI tools to update the system when, ultimately, its all happening on the command-line anyway. The GUI tools just hide the complexity I don’t mind seeing.

I ended up making a tresnuti Skripta, update, which would run all the steps required to get aptitude to just go ahead and upgrade already, kthx?©, perhaps stopping along the way to back up my configuration, remount the NFS network share where we keep an on-site repository, back up the local cache of aptitude’s installed packages, do some folder-link shuffling to use a local copy if the network share couldn’t remount, sync between the local copy and the network share if the previous update had a network share issue, and update lists of packages in the repository. In general, it wouldn’t go ahead if there were any errors though, as you can tell, this script became a messy beast that went above and beyond the original requirements. It worked well for me.

Until the day came to update between Kubuntu 6.10 za 7.04. I did this manually though, not with the script.

I ended up reinstalling from scratch as a result of the mess that ensued. At least, as a backup administrator should do well to demonstrate, it was easy to recover everything I really needed. 🙂

What else is out there?

Even before I had to reinstall Kubuntu, I was introduced to another distribution called Gentoo. There are 2 very distinct differences between Gentoo and Ubuntu’s update system. The first is that Gentoo is a source-based distribution. This means that when you update a package, the package manager downloads the source and compiles everything, hopefully optimising it for your system. This, I think, is very cool. The downside to this is that compiling everything takes a very long time.

Here are my (very unscientific) estimates for the length of time it takes to install a basic GUI OS to a desktop from installation media, excluding extraneous drivers (na primjer, the latest 3D graphics drivers):

OS: minmax (median)

Windows Vista: 15 – 30 (20) minuta

Ubuntu: 15 – 40 (20) minuta

Gentoo: 3 – 40 (6) hours

Gentoo also requires much tinkering with the config files in order to get things workingthis is another reason for the extremely long delay between inserting the CD and booting your awesome* new desktop. Popular applications have binary packages available for downloadthough this isn’t a default option.

They see me rollin

There is one more very important distinction Gentoo has from most other distributions. It is arolling-releasedistribution. This means that there isn’t any rigorous version orreleasethat the distribution adheres to. If you install Gentoo todayif you finish installing Gentoo today, you’re probably going to have the latest version of all the applications you installed. If some obscure application gets a major update tomorrow, within a few days, if you update your system, you’re going to have that latest version on your desktop.

The difference between this rolling release and theotherdistributions is rather staggering. Na primjer: If KDE 4.2 were to be released tomorrow, you’d probably have to wait less than 2 weeks for it to be available on Gentoo. Ubuntu users might have to wait till 9.04 – that’s a 4-month wait.

Something more suitable?

Personally, I’m not willing to put in the 40 hours of effort to get my system working the way I want it to. My colleague had to reinstall recently for some obscure reason and it turns out he wasn’t willing to put in the 6 hours (he’s more experienced with Gentoo) of effort to get his system back to how it was running either. Umjesto, Arch Linux caught his eye. Arch Linux is a rolling-release (like Gentoo), binary-based (like Ubuntu) distribution. Its packages (dobro, the vast majority of them) don’t need much tinkering with their config files to get things working nicely either. Its the best of both worlds!

You still need to know what you’re doing* but if you’ve come to this juncture, it shouldn’t be such a giant leap of faith. Arch Linux’s package manager, called pacčovjek, has built-in dependency and conflict handling. I use another package manager, jogurt (French for yoghurt), which has very quickly become popular with Arch users. Yaourt enhances the functionality of pacman by allowing you to download and install applications directly from the AUR, ili Arch korisnik repozitorij. This repository contains scripts that allow you to automatically download and install many applications that would otherwise be completely unsupported by Arch’s own core developers. It downloads and compiles the package into a chroot’d environment. It then packages the chroot’d environment into a pacman-compatible package tarball and uses pacman to deploy it into your system.

Također, the AUR supports a voting system whereby popular packages get placed into the more official [community] repozitorij. Yaourt also supports an automated voting mechanism whereby, after installing a package via AUR, it asks if you want to vote for its inclusion in [community].

I estimate that the time taken for my Arch installation was about 90 minuta. I don’t recommend Archlinux for newbies though I do recommend it for any Linux user who’s gotten bored with other distrosand wants to get into the nitty gritty without having to install Linux From Scratch. Arch Linux has been getting pretty popular these days. Its currently at number 14 na Distrowatch.

* IF you know what you’re doing. AND YOU BETTER BLOODY KNOW WHAT YOU’RE DOING!